How do I change the units?

Geometry Elements - Units

To change any of the units in your circuit, do the following:

1. Select Circuit => Units from the project editor main menu.

2. Click on the appropriate drop list for the units which you desire to change. Note that the Resistance, Capacitance and Inductance drop lists are enabled only if the project is a netlist.

3. Select the desired unit from the drop list.

4. If you are selecting a new length unit, you must also select the appropriate radio button in the Applying new units section of the dialog box.

5. Click on OK to close the dialog box and apply the changes to your circuit.